Junior Racer Drone Kit
SKU:
$249.99
$249.99
per item
In a collaboration between Drones in School, MultiGP STEM Alliance, and Nvision, this package will get your STEM Drone program what it needs to be racing in minutes! It includes all the items you need to get started.
The drone is powerful yet easy to fly with brushless motors and a durable frame.
Also included is an RC controller, which utilizes standard D16 and D8 protocols. It has a built in charging module that supports USB charging. With a rubber coating, it is easy to hold and use.
The video goggles included are small and lightweight. Dual antennas for excellent reception, it includes a 3 inch high brightness LCD screen and a 5.8GHz 40 channel receiver.
The RC controller can also be plugged into a PC and some mobile phones to practice using FPV Racing simulators! Proper USB cable required.
This package was created specifically to work with the Drones In School curriculum.
Drone Specifications
RC Controller Specifications
Goggles Specifications
Package Includes
NOTE: Drone frames can be Black or Red.
The drone is powerful yet easy to fly with brushless motors and a durable frame.
Also included is an RC controller, which utilizes standard D16 and D8 protocols. It has a built in charging module that supports USB charging. With a rubber coating, it is easy to hold and use.
The video goggles included are small and lightweight. Dual antennas for excellent reception, it includes a 3 inch high brightness LCD screen and a 5.8GHz 40 channel receiver.
The RC controller can also be plugged into a PC and some mobile phones to practice using FPV Racing simulators! Proper USB cable required.
This package was created specifically to work with the Drones In School curriculum.
Drone Specifications
- Frame: Junior Racer 75
- Flight Controller: F4-12A AIO FC
- Motors: 1103-8000kv Brushless
- Propeller: Gemfan 1636 4 Blade
- Battery: 300mAh 3s 45c
- Weight: 50.4g without battery
- Camera: Runcam
- Video transmitter: 5.8GHz Amateur Band
- Color: Red
RC Controller Specifications
- Item: NVision LiteRadio 2
- Frequency Range: 2.4G (2403MHz-2447MHz) (Amateur band)
- 2.4G System: NRF24L01 or CC2500
- Channel: 8
- System: Frsky Protocol D16 (default), D8
- Power: ≤80mw
- Model Type: Multi-rotor
- Supports USB Charging
- Supports FPV Simulators
- Output: PPM, support Student Radio Mode
- LED Light: Green-Power On / Red-Warning / Blue-Normal
- Battery: 350mAh 2S Battery (Recommended spares with additional capacity here!)
- Weight: 227.4g (with battery)
Goggles Specifications
- Screen size: 3.0 Inch
- Resolution: 480*320
- Display Ratio: 16:9
- View Angle: 6 o'clock
- Brightness: 500cd/m² with high brightness backlight LED
- Video time-delay less than 20ms
- 4X Fresnel Lens, 92% transparent rate with no light distortion
- Antenna: 2 X RP-SMA male (important if you change antennas to use RP-SMA connectors or an RP-SMA to SMA adapter)
- AV Jack: External video signals input or internals AV signal output
- Power adapter: DC5V/1A (USB interface)
- Battery: 3.7V/1200mAh,Each full charge revive around 2.5hr working time
- Power Consumption: 300~330mA at 3.7~4.2V
- Maximum charge current of 500mA
- Dimension: 13.5cm * 13.2cm * 6.5cm
- Weight: 180g (with headband, not including antennas)
Package Includes
- 1x Junior Racer STEM
- 1x Charger
- 1x FPV Goggles
- 1x 300mAh 3s 45c Battery
- 1x RC Transmitter
NOTE: Drone frames can be Black or Red.
