In a collaboration between Drones in School
, MultiGP STEM Alliance, and Nvision, this package will get your STEM Drone program what it needs to be racing in minutes! It includes all the items you need to get started.
The drone is powerful with brushless motors and a durable frame. The advanced nature of this drone does require some additional configuration and setup to achieve optimum flight properties. This kit is not recommended for new teams or teams with limited support related to Betaflight setup and troubleshooting.
Also included is an RC controller, which utilizes standard D16 and D8 protocols. It has a built in charging module that supports USB charging. With a rubber coating, it is easy to hold and use. The video goggles included are small and lightweight. Dual antennas for excellent reception, it includes a 3 inch high brightness LCD screen and a 5.8GHz 40 channel receiver. The RC controller can also be plugged into a PC and some mobile phones to practice using FPV Racing simulators! Proper USB cable required.
Drone Specifications
Frame: Junior Racer 75
Flight Controller: F4-12A AIO FC
Motors: 1103-8000kv Brushless
Propeller: Gemfan 1636 4 Blade
Battery: 300mAh 3s 45c
Weight: 50.4g without battery
Camera: Runcam
Video transmitter: 5.8GHz Amateur Band
Color: Red
RC Controller Specifications
Item: NVision LiteRadio 2
Frequency Range: 2.4G (2403MHz-2447MHz) (Amateur band)
2.4G System: NRF24L01 or CC2500
Channel: 8
System: Frsky Protocol D16 (default), D8
Power: ≤80mw
Model Type: Multi-rotor
Supports USB Charging
Supports FPV Simulators
Output: PPM, support Student Radio Mode
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: 350mAh 2S Battery (Recommended spares with additional capacity here
!)
Weight: 227.4g (with battery)
Goggles Specifications
Screen size: 3.0 Inch
Resolution: 480*320
Display Ratio: 16:9
View Angle: 6 o'clock
Brightness: 500cd/m² with high brightness backlight LED
Video time-delay less than 20ms
4X Fresnel Lens, 92% transparent rate with no light distortion
Antenna: 2 X RP-SMA male (important if you change antennas to use RP-SMA connectors or an RP-SMA to SMA adapter)
AV Jack: External video signals input or internals AV signal output
Power adapter: DC5V/1A (USB interface)
Battery: 3.7V/1200mAh,Each full charge revive around 2.5hr working time
Power Consumption: 300~330mA at 3.7~4.2V
Maximum charge current of 500mA
Dimension: 13.5cm * 13.2cm * 6.5cm
Weight: 180g (with headband, not including antennas)
Package Includes
1x Junior Racer STEM
1x Charger
1x FPV Goggles
1x 300mAh 3s 45c Battery
1x RC Transmitter
NOTE: Drone frames can be Black or Red.
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Drones in School cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.
